REMUCH®CUSTOM HOME SOLUTION
Home / Products / Interior Doors
REMUCH product line

Interior Doors

Room doors and door systems supplied as part of a whole-home package, so the finish matches your wardrobes, wall panels and cabinetry.

Request a Quote Design Gallery
Specification

What we supply

ScopeInterior room doors · Door sets · Hidden / invisible door options
Material basisWood-based boards: plywood or particle board where applicable
MatchingFinishes coordinated with cabinetry and wall panels in the same order
Order sizeNo MOQ
Lead timeConfirmed with your quotation
To confirmDoor leaf construction, frames, hardware, locksets and fire-rating requirements
Straight answers only. We publish the specifications we can confirm. Anything project-specific — board thickness, hardware, glazing build-up, certifications — is confirmed in writing with your quotation rather than guessed on a product page.
At a glance

Order basics

  • No minimum order quantity
  • Plywood & particle board
  • 30–60 day lead time
  • Made to your drawings
  • On-site installation not included

Have drawings already?

Send plans, dimensions or even a sketch. We will quote against them and confirm every open detail in writing before production.

Send an enquiry
By the numbers

What we can confirm

Only figures we can stand behind. Anything project-specific is put in writing with your quotation rather than guessed on a product page.

No MOQCabinetry lines, any order size
30–60 DaysConfirmed cabinetry lead time
2 Board OptionsPlywood & particle board
5Coordinated product lines
In practice

How this line is specified

Design references below illustrate layouts and style directions. They are not photographs of delivered projects.

Design reference: Interior scene with a timber room door and door frame, REMUCH custom home solution
Scene reference · 3D rendering showing the application context. Not a product photograph of this line and not a delivered project.
Application context

Shown in a room, not as a product shot

Product photography for this line is being prepared. The image shows an interior scene where this type of element appears — it is a 3D design reference, not a product photograph of this line, and not a delivered project.

Send your specification and we will supply project-specific drawings, finish options and a written quotation.

Request a quotation
Application scenarios

Typical project situations

Common ways buyers specify this line. These are illustrative scenarios, not named client case studies — we do not publish client names, project names or project counts.

Design reference: Interior scene with a timber room door and door frame, REMUCH custom home solutionScene reference

Whole-home finish matching

Room doors specified alongside wardrobes and wall panels so the finish is consistent across the joinery package.

Design reference: Interior scene with a full-height timber wall panelling, REMUCH custom home solutionScene reference

Hidden / invisible door options

Door systems integrated into a feature wall or panelled elevation, detailed with the room joinery.

Design reference: Interior scene with a large aluminium-framed window, REMUCH custom home solutionScene reference

Phased residential fit-outs

Door sets ordered per phase or per unit, with no minimum order quantity on cabinetry lines.

About the imagery. Every image on this site is a 3D design reference used to illustrate layouts, finishes and style directions. None of them show a REMUCH factory, a delivered installation or a named client project. Ask us for references with your quotation if you need project evidence.
Before you order

Specification checklist

Confirm these fields in your enquiry. We will record the final decisions in writing before production.

  • Opening sizes and swing direction
  • Door leaf construction and thickness
  • Frame type and architrave detail
  • Surface finish and matching reference
  • Hardware, locksets and hinges
  • Fire or acoustic requirements, if any
  • Quantity, phasing and destination
  • Packing method and fixing details
With your order

What we document

The written record that accompanies an order — evidence of what was agreed rather than marketing claims.

  • Written quotation against your specification
  • Confirmed finish matching across categories
  • Packing method and loading guidance
  • Fixing details confirmed in writing
Environmental grades, certifications, hardware brands and performance ratings are only stated once confirmed against the actual supplied item and destination market.
More questions

Still deciding?

Is product photography available for doors?

Photography for this line is being prepared. Send your specification and we will supply project-specific drawings, finish options and a quotation.

Can I see a named case study?

We do not publish client names, project names or project counts. Ask for references with your quotation and we will respond in writing.

Full FAQ

From the journal

Buying guides

No MOQ Custom Cabinetry: A Practical Guide for Small-Batch Buyers →Plywood vs Particle Board for Custom Wardrobes and Kitchen Cabinets →What Happens During a 30–60 Day Custom Cabinet Lead Time →

All articles

In-depth guide

Specifying Interior Doors properly

Doors are the line where a whole-home order either looks coherent or falls apart. The leaf itself is rarely the problem; the opening, the swing, the frame and the finish reference are. This section is written for buyers who are ordering doors together with wardrobes and wall panels and need the finishes to agree.

On this pageHow to specifyDecision tableOrder processCommon mistakesTerminologyMore questionsRelated reading
01 / Specification

Six things a quotation depends on

Each point below is a field the buyer supplies, a decision we discuss, or a detail we record in writing. None of them require a published numerical claim.

01

Opening sizes and swing direction

Record each opening width and height, the wall thickness, and the swing direction as seen from a stated side of the room. "Left hand" and "right hand" mean different things in different markets, so describe the hinge side and the direction of travel rather than relying on a label alone. A door schedule with one row per opening is the clearest way to send this. We quote against the schedule you send and record the agreed sizes in writing.

02

Leaf construction and thickness

Door leaf construction and thickness are confirmed per project. Where a wood-based board is used, plywood or particle board may apply. Tell us what the door has to do — a standard room door, a hidden door in a panelled elevation, or a door that must match a feature wall — because that changes how the leaf is detailed.

03

Frame type and architrave detail

Frame type, architrave profile and how the frame meets the wall finish should be decided together with the wall panelling, not afterwards. If the door is being integrated into a panelled wall, send the wall elevation as well as the opening schedule so the joint lines can be planned. We confirm the frame and architrave detail in writing before production.

04

Hardware, locksets and hinges

Hardware, locksets and hinges are configured per project. Say whether hardware is in scope for your enquiry, and give a reference for the finish you want. Where a whole-home order includes cabinetry, matching the hardware finish to the rest of the joinery is easier when it is raised at enquiry stage rather than after the specification is frozen.

05

Finish matching across the package

Matching finishes across cabinetry, doors and panels is one of the main reasons buyers consolidate an order with us. Give one finish reference for the package and list every category it must cover. One written specification can then hold the facing, edge treatment and finish across the board-based lines in the same order.

06

Regulatory requirements and commercials

If the project has fire or acoustic requirements, state them and name the destination market — we will confirm what is available against the actual supplied item rather than publishing a rating on a product page. Add quantity, phasing and destination to the enquiry. There is no minimum order quantity on cabinetry lines.

02 / Decision table

What you send, what we confirm

Use this as the agenda for your enquiry. A complete enquiry produces a comparable quotation.

Decision pointWhat to send usWhat we confirm in writing
OpeningsA door schedule: width, height, wall thickness, hinge sideThe agreed opening sizes and swing description
LeafConstruction, thickness and intended use of each doorLeaf construction and thickness per project
FrameFrame type, architrave profile, wall interfaceFrame and architrave detail in the written specification
HardwareLocksets, hinges and hardware finish referenceThe hardware scope and finish actually quoted
FinishOne reference and the categories it must matchA shared finish specification across the ordered lines
RequirementsFire or acoustic needs, destination market, quantityWhat can be supplied against the stated requirement
No invented numbers. Board thickness, hardware, ratings and certification standards are project-specific. They are confirmed in writing against the actual supplied item rather than printed as fixed values on this page.
03 / Process

From enquiry to shipment

A short, auditable path. Every open point is written down before production starts.

01EnquirySend the product line, quantity, destination country, target date and your drawings, dimensions or a sketch.
02Open pointsEvery undecided field is listed in writing so nothing is assumed on either side.
03Written quotationWe quote against the specification you sent, not against a catalogue size.
04Freeze the specBoard, finish, hardware or configuration are confirmed in writing before production.
05ProductionMade to the confirmed drawings. No MOQ applies to the cabinetry lines.
06Packing & loadingPacking method and loading guidance are issued with the order. On-site measuring and installation are outside our scope.

The 30–60 day window applies to cabinetry lines. Aluminium windows are quoted as a separate line with their own lead time. On-site measuring and installation are outside our scope for overseas orders.

04 / Before you order

Five mistakes that cost time

The most common reasons an enquiry has to be re-quoted. Avoiding them is faster than fixing them.

Using hand labels without a hinge side

Left-hand and right-hand conventions differ by market. State the hinge side and the direction of travel as seen from a named side of the room instead.

Ordering doors after the panelling is fixed

A hidden door and a panelled feature wall share joint lines. Decide them together and send the wall elevation with the door schedule.

Assuming a rating is included

Fire and acoustic requirements depend on the destination market and the actual supplied item. Tell us the requirement; we confirm what applies in writing rather than printing a rating on a page.

Leaving hardware out of the scope conversation

If hardware is neither included nor explicitly excluded, two quotations will describe different packages. Say which you want.

Giving a finish reference only for the doors

When doors, wardrobes and panels must agree, give one reference and name every category it applies to, so a single written specification can cover them.

05 / Terminology

The words on the drawing

Plain definitions so a specification means the same thing to both sides.

Door schedule
A table with one row per opening: sizes, wall thickness, hinge side and any special requirement.
Swing
The direction a door leaf travels, described from a stated side of the room to avoid hand-label ambiguity.
Leaf
The moving panel of the door, distinct from the frame fixed into the wall.
Architrave
The trim that covers the joint between the frame and the wall finish.
Hidden door
A door detailed to sit flush within a panelled elevation so the joint lines continue across the wall.
Frame
The fixed structure set into the opening that carries the leaf and hardware.
Finish reference
The sample or reference used to define the visible surface across several product lines.
Scene reference
A 3D interior rendering showing where this type of element appears. Not a product photograph of this line.
06 / Questions

More questions buyers ask

Short, direct answers. Anything project-specific is answered in writing with your quotation.

Can doors be ordered on their own?

They can be, but they are usually most efficient as part of a whole-home order where finishes are matched across categories.

Why is there no product photography for this line?

Photography for the door line is being prepared. The interior images shown here are 3D scene references indicating the application context, not product photographs of this line and not delivered projects.

What do you need in a door schedule?

Opening width and height, wall thickness, hinge side and swing described from a stated side of the room, frame type, hardware and any fire or acoustic requirement.

Can the door finish match my wardrobe finish?

Yes. Matching finishes across cabinetry, doors and panels is one of the reasons buyers consolidate the order, and one written specification can cover all of them.

Do you supply fire-rated or acoustic doors?

Tell us the requirement and the destination market. We will confirm what is available against your project specification in writing rather than publishing a rating on a product page.

Are hardware and locksets included?

Hardware, locksets and hinges are configured per project. State whether they are in scope for your enquiry so the quotation describes the right package.

Do you install the doors overseas?

On-site installation is outside our scope for overseas orders. Packing and fixing details are confirmed in writing with your order.

What is the lead time for interior doors?

Lead time is confirmed with your quotation. The published 30 to 60 day window applies to our cabinetry lines.

Can I see a named case study?

We do not publish client names, project names or project counts. Ask for references with your quotation and we will respond in writing.

What board is used for the doors?

Where a wood-based board applies, plywood or particle board may be used; leaf construction and thickness are confirmed per project.

Is there a minimum order quantity for doors?

There is no minimum order quantity on cabinetry lines. Confirm the commercial terms for your specific door package in the written quotation.

Ask us directly

Design references

Layouts & style ideas

3D design references to illustrate room layouts and finishes. Not photographs of delivered projects.

Product photography for this line is being prepared. In the meantime, send us your specification and we will supply project-specific drawings, finish options and a quotation. The gallery on this site shows cabinetry design references only.
Questions

Common questions

Are doors sold separately?

They can be, but they are most efficient as part of a whole-home order where finishes are matched across categories.

Can you match the wardrobe finish?

Yes — matching finishes across cabinetry, doors and panels is one of the reasons buyers consolidate the order with us.

What specifications do I need to send?

Opening sizes, swing direction, frame type, hardware and any fire or acoustic requirements.

Next step

Get a quotation

Tell us the product, quantity, board or configuration, destination and your timeline.

Request a Quote

Prefer messaging? WhatsApp +86 159 1905 5618

Start a project

Tell us what you are building

Send your drawings, quantities and destination. We will come back with a quotation and a production plan.

Request a QuoteWhatsApp Us